Fenix Rechargeable Headlamp Fenix HP35R

This description has been machine translated from the original text.

The extremely powerful Fenix HP35R rechargeable headlamp offers an unrivalled output of up to 4000 lumens (ANSI) and a range of 450 metres. The excellent performance has been achieved by using a powerful Cree XHP70 LED with a neutral tint and a pair of Luminus SST-20 LEDs with a warm light tint and a high CRI 94.5 (Color Rendering Index) color quality index (CRI 94.5). The warm light penetrates better through fog, rain and snow, so you'll especially benefit from it in poor weather conditions. The headlamp is equipped with a driving reflector and a pair of smaller reflectors with a wide cone of light. The reflectors can be switched on individually or can be run simultaneously in combination mode. With the intuitive rotary and electronic switch control, you can handle every situation with ease.

A wide perforated strap in black ensures a comfortable fit on the head. If you only want to wear the headlamp on your helmet, then we recommend purchasing the Fenix HP35R SAR version, which has an integrated NVG helmet mount and a flame-retardant and anti-static rubber strap for work helmets.

It uses a 10000 mAh Li-ion battery for power, which is housed in a separate case on an adjustable cable. The case can be worn on the back of the neck, placed on a belt, in a pocket or backpack. This increases wearing comfort and in winter the batteries are better protected against frost. The battery case is equipped with a red light with up to 20 lumens, a charge indicator and a USB-C charging connector. The USB-C charging connector also functions as an output, so the battery case can also be used as a power bank for charging your mobile phone, GPS navigation and other USB devices.

The headlamp offers a total of 12 power modes. In the lowest mode with 5 lumens, it provides an excellent battery life of up to 500 hours (that's more than 20 days). The body of the headlamp is made of aluminum alloy used in the aerospace industry, so excellent cooling and resistance to damage is ensured. This high-performance headlamp with separate battery is designed specifically for search and rescue operations, caving and work use, but will also be appreciated by ski mountaineers, mushers and enthusiasts of other extreme sports and outdoor activities.

All headlamp parameters (lumen output, battery life, waterproofing, range and shockproofing) are measured in accordance with ANSI/NEMA FL 1-2009.

Fenix HP35R Headlamp Parameters

• A powerful Cree XHP70 LED with a 4500K neutral hue and two Luminus SST-20 LEDs with a 3000K warm hue and high CRI of 94.5 are used, all with a lifetime of 50,000 hours.
• Twelve light modes:
• • Remote reflector: 3000 lumens (5.7 hours) -> 800 lumens (11.7 hours) -> 350 lumens (28.4 hours) -> 50 lumens (120 hours).
  • Wide reflectors: 1200 lumens (8 hours) -> 400 lumens (30.8 hours) -> 50 lumens (120 hours) -> 5 lumens(500 hours).
  • Combination mode: 4000 lumens (4.3 hours) -> 1200 lumens (8 hours) -> 400 lumens (18 hours) -> 50 lumens (120 hours).
• Combination mode produces a light cone with a range of 450 meters (50853 cd), the range reflector shines up to 440 meters (48518 cd) and the wide reflector shines up to 122 meters (3746 cd).
• Digitally controlled for constant brightness.
• Intelligent overheat protection and proximity sensor to avoid potentially dangerous situations.
• Uses a 10,000 mAh Li-ion battery for power, which is housed in a separate charging case with a rear red light.
• The battery case, can be placed on the back of the neck, on a belt, in a pocket or backpack.
• Charging via modern USB-C connector. Charging time 2 hours with a USB power supply of at least 27 W.
• Powerbank function - USB-C output for charging additional USB devices with up to 20 W (PD3.0/PD2.0 protocols).
• The battery case is equipped with a battery status indicator and a red light with flashing (5 lumens) and steady light (20 lumens) function.
• The headlamp can be tilted in several steps to set the desired direction of light.
• The body of the headlamp is made of aluminium alloy used in the aerospace industry.
• Shockproof against falls from a height of 2 metres.
• Weight of the complete headlamp 433 grams (including straps and battery).
• Headlamp dimensions: 9,41 cm x 5,74 cm x 4,87 cm
• Dimensions of the battery case: 9.53 cm x 5.58 cm x 4 cm
• Dustproof and waterproof to IP66 standard (spraying with strong jets of water from all directions).
• Included is a headlamp with a fabric perforated strap, 2 plastic clips for attaching the cable to the head strap, 4 brackets for attaching the head strap to the helmet, an extension cable to the battery case and a USB-C charging cable.
• For easy attachment to the helmet, the Fenix ALG-03, ALG-04 mount can be purchased.
• The headlamp can be accompanied by a Fenix APB-30 case, a powerful USB mains adapter, a USB car adapter and a coloured USB-C cable.

Using the Fenix HP35R headlamp

The headlamp is switched on and off with the rotary switch on the right side. In the first position the headlamp is off, turning it to the second position switches it to the high beam mode, turning it to the third position switches it to the wide beam mode, and turning it to the fourth position switches it to the combination of both beam reflectors. The power modes in each position are cycled by pressing a button on the side of the rotary switch.

The red light on the battery housing is activated by holding the button on the battery housing for approx. 0,5 s. Single presses are then used to switch between the flashing light (5 lumens) and the steady light (20 lumens).

Memory for last set power mode - the headlamp has a memory and will always switch on in the last set power mode of the selected reflector, except for the highest power modes of the main and wide reflectors, instead it will switch on in the second highest mode of that reflector.

The length of the cable connecting the headlamp to the battery case can be increased using the included extension cable.

Battery status indication - pressing the button on the battery case activates the battery capacity indicator (four lit diodes 80-100%, three diodes 60-80%, two diodes 40-60%, one diode 20-40%, one flashing diode indicates 20% remaining battery capacity).

Charging - Unclip the rubber cap of the USB-C connector on the battery case and use the included USB-C cable to plug it into your computer, a mains USB adapter or a USB car adapter. Alternatively, any mobile phone charger with a USB-C connector can also be used for charging. The indicator LEDs on the battery case blink during charging, and are permanently lit when fully charged. Charging a fully discharged battery takes about 2 hours when using a USB power supply with at least 27 W of power. When using a weaker power supply, the charging time will be extended.

Activate the USB output (powerbank function) - connect the device you want to recharge. Activation of the USB output is indicated by flashing LEDs on the case.

Intelligent overheating protection - if the temperature of the headlamp rises above 55 °C, it will automatically start to reduce power until the temperature stabilizes. As soon as the temperature drops below 55 °C, the output will automatically increase again.

Intelligent power reduction - The headlamp has a built-in protection circuit. When the spotlight gets close to the illuminated object (less than 60 mm) for more than 1 s, it will automatically reduce the power to low mode to prevent damage to the object from strong light and glare from reflected light. When the reflector is away from the illuminated object, the headlamp will automatically restore the previously used power level. Smart proximity sensor on/off - Press the side button on the headlamp for 6 seconds when the headlamp is turned off. Turning on the function is indicated by the headlamp with two blinks in low mode. Turning the function off is indicated by the headlamp with eight blinks in low mode.

Notice

• Do not disassemble the sealed parts yourself, this will violate the warranty.
• If the headlamp blinks, does not switch to higher power modes, or does not light up, it may be due to one of the following reasons:
  • The battery is dead - charge it.
  • Make sure the connector on the cable between the headlamp and the battery case is firmly connected.

Warranty

Warranty five years for the headlamp and 2 years for the battery.