Fenix Rechargeable LED Flashlight TK05R

This description has been machine translated from the original text.

The Fenix TK05R is a pocket-sized rechargeable tactical flashlight with easy operation, quick strobe activation and up to 1000 lumens of power. It is equipped with Osram's top-of-the-line CSLPM1.TG LED, which gives it a superbly focused cone and illuminates up to 450 metres. The flashlight uses a dual tactical switch that allows for faster and more reliable control in crisis situations. The flashlight head is equipped with a striker rim so the flashlight can be used to break glass or for self-defense. The robust design allows the flashlight to be used on long guns, making it suitable for professionals, armed forces and hunting. The flashlight is powered by a single compact Li-ion 18350 1100 mAh battery (included), which charges directly in the flashlight via a modern USB-C connector and will provide power for up to 14.5 hours of illumination. The solid and waterproof design predestines this tactical flashlight primarily for harsh outdoor conditions and for use in security forces, search and rescue, and hunting.

All flashlight parameters (lumen output, battery run time, waterproofing, range and shock resistance) are measured in accordance with ANSI/NEMA FL 1-2009.

Fenix TK05R Flashlight Parameters

• Osram CSLPM1.TG powerful LED with a lifetime of 50000 hours is used.
• Four power modes: 1000 lumens (0.8 hours) -> 350 lumens (1.75 hours) -> 30 lumens (14.5 hours) -> 1000 lm strobe with variable frequency.
• Endurance times are measured with a rechargeable Li-ion battery type 18350 with a capacity of 1100 mAh (included).
• The USB-C charging port is hidden under a rubber cap on the body of the flashlight.
• Battery charge indication.
• High-efficiency smooth reflector for light cone with a range of up to 450 meters (50600 cd).
• Intelligent overheat protection, low battery warning.
• Dimensions 11.5 cm (length) x 3.2 cm (head diameter) x 2.35 cm (body diameter).
• Weight 124 grams (including battery).
• Solid body construction of aircraft hardened aluminium.
• Durable hard scratch resistant surface - Type III hard anodized.
• Shock resistant to drops from a height of 1 metre.
• Waterproof and dustproof to IP68 standard (tested underwater at a depth of 2 metres for 30 minutes).
• Tempered ultra clear glass lens with anti-reflective coating.
• Dual tactical switch on the end of the flashlight (instant on/off press function, instant strobe).
• Highly wear-resistant lens threads.
• Flashlight comes with ARB-L18-1100 battery pack, wrist loop, USB-C charging cable, spare o-ring and belt holster.
• As an optional accessory it is possible to purchase: the transport cone AOT-03.
• The following accessories are also compatible with the flashlight: quick release bar mount ALG-15, quick release bar mount ALG-00, M-LOK mount Fenix ALG-16, barrel mount Fenix ALG-18, metal magnetic barrel mount, plastic magnetic barrel mount, flashlight optic mount, metal optic mount, Fenix ALD-05 strap for using the flashlight on a helmet, FB-1 bike mount, Fenix bike mount.
• The flashlight can also be supplied with a USB mains adapter and a USB car adapter.

Using the TK05R flashlight

There may be an insulating cap inside the lantern on the battery from the factory. Remove it from the battery pack before first use.

To switch on/off, press the larger tactical button located at the end of the flashlight, hold the button for immediate activation. Press the secondary toggle button to switch between power modes at any time during operation. To switch to flash mode with the flashlight on, hold the toggle button for approximately 0.5 seconds. To switch the luminaire directly into strobe mode, press and hold the toggle button.

Intelligent overheating protection - as the luminaire reaches high power, it experiences a temperature rise. If the temperature exceeds 55°C, the power is automatically reduced. As soon as the temperature drops below 55 °C, the highest power can be used again.

Battery charge indication - the torch always indicates the battery charge status three seconds after switching on. Green indicates sufficient state of charge (100% - 85%), green flashing 85% - 50%, steady red 50% - 25% and flashing red critically discharged battery (25% - 1%). If the battery is discharged, the flashlight will automatically start to switch to lower power modes gradually.

Charging - remove the rubber cap of the charging connector on the side of the lantern and plug in the supplied cable (USB-C connector), plug the other end of the cable into a computer or USB adapter to the mains or car. The side indicator lights red while charging. When fully charged, it will turn green. Charging a fully discharged battery takes approximately 1.5 hours. The flashlight cannot be used while charging.

Please note

• Only use high-quality rechargeable batteries type 18350 with protective electronics.
• Insert the batteries with the positive terminal towards the head of the luminaire.
• If the protective rubber rings appear damaged after prolonged use, replace them. The rings should also be lubricated to prevent erosion of the rubber. By following these rules, the luminaire will be properly protected against water.
• If the lantern flickers, does not switch to higher power modes, or does not light up, it may be due to one of the following reasons:
  • The battery is dead - charge it or replace it.
  • The contacts inside the lantern are dirty - clean them with a cotton swab dipped in alcohol.
  • The head, body or back of the lamp is loose - tighten them.