Fenix Work light and lantern CL27R, green

This description has been machine translated from the original text.

The Fenix CL27R is a multifunctional rechargeable lantern and flashlight. In addition, it also works great as a rechargeable work light, photographer's light or as a home, tent or car light. The high-brightness COB diode provides a wide light cone of up to 1200 lumens (ANSI), the intensity and shade of which can be infinitely controlled with the rotary controls. A remote spotlight with 800 lumens and a range of 177 meters and red light is also available. The main and wide reflector can be combined to obtain an output of up to 1600 lumens. The CL27R is powered by a single Li-ion battery type 21700 with a capacity of 5000 mAh (included). The battery is charged directly in the lantern using the USB-C connector.

Thanks to the durable and shockproof construction with IP66 protection, the light can withstand harsh weather conditions and a fall from a height of 1.5 meters. Wide possibilities of attaching the light are provided by the handle, which is rotatable by 360°, as well as built-in magnets and also has a tripod thread.

All luminaire parameters (lumen output, battery life, waterproofness, range and shock resistance) are measured in accordance with ANSI/NEMA FL 1-2009.

Fenix CL27R Rechargeable Work Light Parameters

• Utilizes a COB LED with an adjustable light temperature range of 2700 to 6500K and a red chip and one Luminus SST-20 LED, both with a 50,000 hour lifetime.
• Power Modes:
  • Long and wide cone: 1600 lumens to 15 lumens with 3.8-100 hours of life.
  • Wide cone: 1200 lumens to 10 lumens with 4.3-170 hours of life.
  • Long cone: 800 lumens to 5 lumens with an endurance of 8-285 hours.
  • Red light: 10 lumens (72 hours) - flicker 10 lumens (144 hours).
• Uses one rechargeable high-capacity Li-ion 21700 5000 mAh rechargeable battery included for power.
• Range of the high beam reflector 177 meters (8233 cd), wide beam reflector 53 meters (690 cd).
• Charging via USB-C connector, charging time 2.5 hours.
• Indication of battery charge status and low voltage warning.
• The light has memory for the set color temperature of the wide reflector and will always turn on at the last set shade.
• Made of aluminium alloy and durable plastic, the lantern is impact resistant to drops from a height of 1.5 metres.
• Waterproof to IP66 standard (heavy rain).
• The lantern is equipped with a threaded handle for fixing to a tripod and an integrated magnet. The handle is rotatable through 360°.
• Dimensions 10,9 cm x 9,2 cm x 3,9 cm.
• Weight 300 grams (including battery).
• Includes lantern, ARB-L21-5000 V2.0 battery, plastic key to release battery cap, USB-C cable, spare o-ring.

Using the Fenix CL27R Rechargeable Lantern

Turn on/off and change the white light output - to turn on the white light mode, turn the left knob clockwise. Turning it then smoothly adjusts the light output from lowest to highest. To reduce the output, turn the left control counterclockwise. To turn it off, turn the left knob counterclockwise to the extreme position.

Switching light modes - switch on the lantern by turning the left control clockwise, it will always switch on in wide cone mode. The top button can then be pressed to cycle through the light modes in the order of wide cone - wide cone - long cone - long cone and wide cone.

Changing the shade of the wide reflector light - when the lantern is switched to wide or combined cone, the shade of the white light of the wide cone can be changed continuously by turning the right control knob in the range 2700 to 6500 K. The shade of the light of the wide cone is 5700 K and cannot be changed. The lantern remembers the set light shade of the wide light cone even after switching off.

Red light - When the lantern is switched off, the red light is switched on and off by holding the electronic switch for 0.5 s. Further presses of the button cycles through the red light modes.

Replacing the battery - use the supplied plastic key to loosen the battery cap by turning it counterclockwise. Insert the battery with the plus pole facing the inside of the lantern and then tighten the cap fully again. Caution: screwing the battery cap with a sharp tool may cause scratches.

Indication of battery charge status - after a short press of the button or when the lantern is switched on, the LED charge status indicator is activated for 3 seconds. Four lit LEDs mean the battery is 80-100% charged, three lit 60-80%, two lit 40-60%, one lit 20-40% and one flashing LED means the battery is less than 20% charged.

Low Battery Warning - If the battery voltage drops below the set level, the lantern will automatically switch to a lower mode until it reaches the lowest output. When low power is reached, the battery charge indicator will flash to remind you to recharge or replace the battery.

Charging the Fenix CL27R lantern

Flip off the dust cap and plug the USB-C charging cable into the lantern's charging port. Replace the dust cap when charging is complete. Normal charging time is 2.5 hours for a fully discharged lantern. During charging, the indicators flash from left to right, once fully charged, all four will remain permanently lit. The lantern can also be used while charging.

Please note

• Do not disassemble the sealed parts yourself, it will violate the warranty.
• Remove the battery from the lantern if you will not be using it for an extended period of time, or loosen the battery cap half a turn.
• Regular cleaning of the electrical contacts ensures trouble-free operation of the luminaire, as dirty contacts can cause the luminaire to flicker, glow intermittently or even not light for the following reasons:
  • The battery is discharged. Charge it or replace it with a charged one.
  • If the electrical contacts inside the lamp are dirty, clean them with a cotton swab dipped in alcohol.

Warranty

Warranty five years for the luminaire, two years for the battery.